LHS-100 Specification

RF Hazard Detector

LHS-100 Specification

The LHS-100 system is particularly designed to make installation as quick and easy as possible, even the indicators having 'push-on' connectors. All elements of the system are IP67 weatherproof and have been tested under extreme conditions. The electronic design has been refined for reliablity and to provide 'fail safe' operation.

Standard Features

Approx. switching level: 1V/m.
Output: Quantity 2 high brightness LEDs (daylight visible) on 2 metre cables.
Power: Either 14V dc or mains power unit designed for remote installation 220-240v, 50Hz.

Options

Solar power.
Modem output.
Alternative power supply configuration.
Different sensitivity.
Cable configuration.

Description

The LHS-100 system comprises:

LHS-100S sensor unit.

Tiewrap or panel mounted
All cables pre-installed
Switching threshold approx 1V/m
Indicators ON when no field connected
IP67 sealed

LHS-100P power supply unit.

240v or 110v input (factory set)
14v dc ouput for LHS-100S
All cables pre-wired
Fused input and ouput
IP67 sealed
Input rating: 4VA

LED indicators (Qty 2)

High brightness RED
Sunlight visable
8.1mm mounting hole
push-on connectors
Sealed units

All required cables (excluding armoured types)
2 metres - mains input cable
10 metres - power unit to sensor cable
2 metres each - sensor to LED cables

Items not included:

Tiewraps as required
armoured cable (if required)
Any junction boxes, as required by the installation.


	LAPLACE INSTRUMENTS LTD 3B, Middlebrook Way, Holt Road, Cromer, Norfolk, NR27 9JR, UK	Tel: + 44 (0)1263 515160 Fax: + 44 (0)1263 512532 E-mail:tech@laplace.co.uk

Main Page Comments/Feedback

If you have any comments, suggestions regarding our site or require further product information please use the feedback form