CIT-10 conducted immunity test system
Description
The CIT-10 (and CIT-10/75) are an integrated unit which includes:
- Signal source
- Modulation
- RF millivoltmeter
- RF power amplifer
- Analogue monitoring of EUT
- PC software (USB port)
This is everything you need apart from CDNs (or BCI) suitable for your EUT cables. Suitable CDNs are available here.
The system covers the range 100KHz to 250MHz and is capable of delivering stress levels well above the 10V industrial requirement, even with an EM Clamp.
Key Points
- A fully integrated and complete solution
- Includes PC software for all control and display functions
- Very easy to set up and use.
- Auto calibration of CDNs and BCI clamps
- Monitoring of EUT during test using analogue input feature.
- Provides a fully compliant test system for self certification requirements.
- High power 75W version (CIT10/75) available.
Software Details
Software is included. This interfaces with the CIT-10 via a standard USB port as fitted to virtually all PCs.
- Auto install application
- Set start frequency
- set stop frequency
- frequency step width
- Log or Lin sweep
- dwell time
- stress voltage
- CDN type
- EUT notes
Once the test is running, a plot of EUT output signal is displayed in real time against stress frequency. This provides an immediate view of the EUT performance. The final result can be plotted and/or saved to file as required.
An additional feature is the Calibration mode which is used in conjunction with a suitable calibration fixture. This enables the output level to be set automatically and correctly for the stress level programmed by the user. This mode effectively calibrates the CDN and calibration file thus created then saved for future use when using the same CDN at the same stress level.