Pre-Selectors for EMC test
Description
These Pre-Selectors are high specification, switched band filters which track the scanning of the EMC Analyser. Control is via USB link from the Laplace EMCEngineer software supplied with SA1002 and SA3000 analysers. Installation and operation is completely automatic, and the filters will synchronise with the analyser scan without any operator intervention. A front panel switch allows manual operation if required.
Two models are available:
RF910 Band B, 150KHz - 30MHz. 8 filter bands
RF915 Band A & B, 9KHz - 30MHz. 13 filter bands
Pass band attenuation is just 4dB and out-of-band rejection is nominally 40dB.
Key Points
- Fully automatic operation.
- Band A (RF910)and band A+B (RF915) versions.
- No active components in RF path, so very high noise tolerance.
- 5 + 5 pole filters for high out-of-band rejection.
- Can be used with any EMC analyser.
- Compact and cost effective.
Pre-Selectors for EMC test is an optional extra for the following products:
3GHz EMC emissions Analyser1GHz EMC emissions Analyser
RF300 Large Loop Antenna
LISN & Voltage Probes
Pre-Selectors for EMC test appears in the following kits:
RFG kit (optional for this kit) RFC- conducted emissions kit (optional for this kit)Associated Downloads
Pre-Selectors - The Why, What and How of Pre-selectors
Data Sheet - Pre-Selector range
User manual - RF910 & RF915 - User manual for the pre-selectors
RF915 Pre-Selector