Equipment required:

A   RF200    Antenna + stand
B   SA1002  EMC analyser
C   SA1020  pre-amplifier
D   RF700    30MHz HP filter
E   ERS        Reference source
F   Software for your PC

For 3GHz system, add RF230 antenna and change EMC analyser to SA3000

Practical notes:
The standards require use of a site free of reflections, a ground plane and height scanning of the antenna. Limited resources dictate that these requirements generally cannot be achieved. The ERS avoids the gross measurement uncertainties that would result.
In addition, ambient noise will mask EUT emissions. Laplace software includes a feature to cancel out the ambient noise so that EUT emissions can be identified and measured.